FC 93 - BASIC Real Output

The BASIC real output function code provides a means of transmitting real data values from the BASIC, Batch 90 and C Language programs to other function blocks. There are no specifications for this block. The BOUT command in the program defines the four outputs. Figure 93-2 shows a sample BASIC configuration. Refer to the MFC BASIC Programming Language Reference for instructions on programming with BASIC.

 

NOTE: This function code is supported only on the BRC-100 and the IMMFP11/12 controllers.

 

Outputs:

Blk

Type

Description

N

R

Program command BOUT sets the output value

N+1

R

N+2

R

N+3

R

 

Specifications:

Spec

Tune

Default

Type

Range

Description

S1

N

0

I

Full

Not Used

 

 

93.1 Application

 

Syntax:

 

BOUT <block number>, <value> BOUT 40, 4.75

 

where:

<block number> =

Valid integer block number configured in the target module.

<value> =

Arithmetic expression stored as the block output