FC 75 - Analog Calibration Status (NAMM02 - IMAMM03)

The analog calibration status function code defines the block in the NAMM02 or IMAMM03 Analog Master Module containing the status of the most recent calibration command. To

determine the status of the calibration command, the operator reads the specifications. Specifications can be read but not modified. This function has no useful outputs.

 

Function code 75 resides in fixed block 81 and produces no usable outputs.

 

 

Outputs:

Blk

Type

Description

81

R

No usable output

 

 

Specifications:

Spec

Tune

Default

Type

Range

Description

S1

N

0

I

Full

Command status

S2

N

0

I

Full

Status of point 1 on I/O Module

S3

N

0

I

Full

Status of point 2 on I/O Module

S4

N

0

I

Full

Status of point 3 on I/O Module

S5

N

0

I

Full

Status of point 4 on I/O Module

S6

N

0

I

Full

Status of point 5 on I/O Module

S7

N

0

I

Full

Status of point 6 on I/O Module

S8

N

0

I

Full

Status of point 7 on I/O Module

S9

N

0

I

Full

Status of point 8 on I/O Module

 

75.1  Explanation

 

The number of specifications available from the most recent calibration command referenced depends on whether it was an I/O module or a point.

 

When the most recent calibration was performed on an I/O module, all nine specifications have meaningful values. The eight points listed are all from the same I/O module.

 

Specifications

 

S1 - OPSTAT

Command Status

 

 

S2 - S9 POINTn

Status of last point calibrated

 

 

 

 

NOTE: The configuration and tuning module suppresses leading zeros on its display.